祖山・桑/青柳研究室
english home
MENU
学生諸君へ
企業の方へ
メンバー紹介
研究テーマ
最近の受賞
最近の新聞発表
最近の学術論文
博士論文
アウトリーチ活動
アクセス
研究室マーク
基盤研究(A)報告
Super Slowの世界
リンク

Last update
2016/11/25
Last update
最近の学術論文
ここでは,祖山・青柳研究室の2003年以降の学術論文(査読付)を掲載しています。
→解説記事や講演論文はこちら
→講演予定はこちら
水噴流を利用した各種ピーニング処理によるステンレス鋼溶接部の疲労強度向上
[噴流工学, 33(1), (2017), 4-9]
桑 脩, 祖山 均
水中レーザピーニングにおける気泡の崩壊衝撃力の影響と合金工具鋼への残留応力の導入
[ショットピーニング技術, 29(1), (2017), 1-7]
國分 朋之, 祖山 均
Preventing Hydrogen Diffusion in Stainless Steel by Cavitating Jet in Air
[Proceedings of 23rd International Conference on Water Jetting, (2016),215-221]
Osamu Takakuwa and Hitoshi Soyama
Digging of Concrete by a Cavitating Jet in Air Comparing with a Conventional Water Jet
[Proceedings of 23rd International Conference on Water Jetting, (2016),209-214]
Hitoshi Soyama, Kyuhei Matsuda and Mitsuhiro Mikami
Opposed Cavitating Jets and their Application for Cavitation Peening of Wall Surrounding Hole
[Proceedings of 23rd International Conference on Water Jetting, (2016),201-208]
Hitoshi Soyama
キャビテーションピーニングによるクロムモリブデン鋼製ボルトの遅れ破壊耐性の向上
[日本機械学会論文集, 82(842), (2016), 16-00111]
熊谷 直輝, 桑 脩, 祖山 均
岩石のメカノルミネッセンスによる発光における支配因子の検討
[日本機械学会論文集, 82(842), (2016), 16-00169]
桑 脩, 宮坂 晃輔, 祖山 均
Enhancing the Durability of Spinal Implant Fixture Applications Made of Ti-6Al-4V ELI by Means of Cavitation Peening
[International Journal of Fatigue, 92, (2016), 360-367]
Osamu Takakuwa, Masaaki Nakai, Kengo Narita, Mitsuo Niinomi, Kazuhiro Hasegawa and Hitoshi Soyama
キャビテーション噴流の加工能力に及ぼすノズルスロート長さの影響
[噴流工学, 32(2), (2016), 25-32]
熊谷 直輝, 祖山 均
水噴流加速式循環型ショットピーニングによるステンレス鋼の下限応力拡大係数範囲の増大
[噴流工学, 32(1), (2016), 4-9]
内藤 暁馬, 桑 脩, 祖山 均
Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting
[Materials Sciences and Applications, 7(4), (2016), 181-191]
Mitsuru Sato, Osamu Takakuwa, Masaaki Nakai, Mitsuo Niinomi, Fumio Takeo and Hitoshi Soyama
Enhancing the Aggressive Intensity of Hydrodynamic Cavitation through a Venturi Tube by Increasing the Pressure in the Region Where the bubbles Collapse
[AIP Advance, 6(4), (2016), 045113-1 - 045113-13]
H. Soyama and J. Hoshino
Hydrodynamic Cavitation Reactor for Efficient Pretreatment of Lignocellulosic Biomass
[Industrial & Engineering Chemistry Research, 55, (2016), 1866-1871]
Kazunori Nakashima, Yuuki Ebi, Naomi Shibasaki-Kitakawa, Hitoshi Soyama and Toshikuni Yonemoto
Comparison between Cavitation Peening and Shot Peening for Extending the Fatigue Life of a Duralumin Plate with a Hole
[Journal of Materials Processing Technology, 227, (2016), 80-87]
Hitoshi Soyama and Fumio Takeo
Surface Mechanics Design of Metallic Materials on Mechanical Surface Treatments
[Mechanical Engeneering Review, 2(1), (2015), 14-00192]
Hitoshi Soyama
Mechanical Surface Treatment of Duralumin Plate by Bubble Induced by Pulse Laser
[Journal of Physics: Conference Series, 656(1), (2015), 12108-12111]
H. Soyama, H. Sasaki, S. Endo and Y. Iga
Surface Mechanics Design by Cavitation Peening
[Journal of Engineering, (2015), DOI:10.1049/joe.2015.0055]
Hitoshi Soyama
Preventing Hydrogen Embrittlement in Stainless Steel by Means of Compressive Stress Induced by Cavitation Peening
[Journal of Engineering, (2015), DOI:10.1049/joe.2015.0065]
Osamu Takakuwa and Hitoshi Soyama
Suppression of Fatigue Crack Propagation of Duralumin by Cavitation Peening
[Journal of Engineering, (2015), DOI:10.1049/joe.2015.0066]
Hitoshi Soyama, Naoki Kumagai, Osamu Takakuwa and Fumio Takeo
機械的表面改質によるステンレス鋼の水素脆化抑止
[JOSSAR2015論文集, (2015), 128-133]
桑 脩,祖山 均
水中ウォータージェットによる機械的表面改質におけるキャビテーションピーニングとウォータージェットピーニングの判別法
[噴流工学, 31(2), (2015), 12-19]
祖山 均
Movement of Dislocations in the Sub-Surface of a Polycrystalline Metal by Cavitation Peening Observed by Transmission Electron Microscopy
[Materials Sciences and Applications, 5(6), (2015), 430-440]
Osamu Takakuwa, Akihiko Chiba and Hitoshi Soyama
Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel
[Advances in Chemical Engineering and Science, 5(1), (2015), 62-71]
Osamu Takakuwa and Hitoshi Soyama
ヘマタイトの熱電変換特性に及ぼす陽極酸化条件の影響
[日本機械学会論文集, 81(825), (2015), 14-00549]
十二町 直哉,祖山 均
キャビテーションピーニングによるオーステナイト系ステンレス鋼への水素侵入抑止
[日本機械学会論文集, 81(824), (2015), 14-00638]
桑 脩,眞野 優太,祖山 均
微小圧子押込み試験によるオーステナイト系ステンレス鋼の水素侵入量評価
[日本機械学会論文集, 81(823), (2015), 14-00426]
眞野 優太,桑 脩,祖山 均
Evaluation of the Efficiency of Cleaning Dental Plaque on Titanium Using a Cavitating Jet
[Journal of Biomechanical Science and Engineering,9(3),2014,14-00297]
Mariko Kikuchi, Takashi Takiguchi, Junki Yamada, Matsuo Yamamoto and Hitoshi Soyama
Reduction of Hydrogen Embrittlement Cracking of Stainless Steel SUS316L by Cavitation Peening
[Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCF/SIF-2014),(2014), 401-405]
Hitoshi Soyama and Osamu Takakuwa
The Interaction between Hydrogen and Surface Stress in Stainless Steel
[Proceedings of the 12th International Conference on Material Science and Engineering Technology, (2014), 1285-1289]
Osamu TAKAKUWA, Yuta MANO and Hitoshi SOYAMA
Improvement of Threshold Stress Intensity Factor Range of Stainless Steel by Cavitation Peening
[Proceedings of 12th International Conference on Shot Peening, (2014),55-60]
Hitoshi Soyama
Improvement of Fatigue Strength of Duralumin Plate with a Hole by a Cavitating Jet
[Proceedings of 22nd International Conference on Water Jetting, (2014),57-65]
Hitoshi Soyama
Effect of Indentation Load on Vickers Hardness of Austenitic Stainless Steel after Hydrogen Charging
[Proceedings of the ASME 2014 Pressure Vessels & Piping Conference, PVP2014-28280, (2014), 1-6]
Osamu Takakuwa, Yuta Mano and Hitoshi Soyama
The Use of Cavitation Peening to Increase the Fatigue Strength of Duralumin Plates Containing Fastener Holes
[Materials Sciences and Applications,5(6),(2014),430-440]
Hitoshi Soyama
Effect of Hydrogen on the Micro- and Macro-Strain Near the Surface of Austenitic Steel
[Advanced Materials Research,936,(2014),1298-1302]
Osamu Takakuwa, Yuta Mano and Hitoshi Soyama
Effect of Nozzle Geometry on Aggressivity of Cavitating Jet for Erosion Test and Applications
[Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction,(2014),283-302]
Satoshi Nishimura, Osamu Takakuwa and Hitoshi Soyama
Increase in the Local Yield Stress near the Surface of Austenitic Stainless Steel due to Invasion by Hydrogen
[International Journal of Hydrogen Energy,39(11),(2014),6095-6103]
Osamu Takakuwa, Yuta Mano and Hitoshi Soyama
荷重制御型平面曲げ式疲労試験機による表面改質層における疲労亀裂進展挙動の定量的評価
[日本機械学会論文集, 80(810), (2014), smm0022]
桑脩,左奈田一将,祖山均
Effect of Load Current Density during the Production of Cu2O/Cu Solar Cells by Anodic Oxidation on Film Quality and Output Power
[Solid-State Electronics,91,(2014),130-136]
Kenta Hasuda, Osamu Takakuwa, Hitoshi Soyama
Enhancing the Aggressive Intensity of a Cavitating Jet by Introducing a Cavitator and a Guide Pipe
[Journal of Fluid Science and Technology,9(1),(2014),JFST0001,1-12]
Hitoshi Soyama
キャビテーションピーニングで加工したクロムモリブデン鋼の渦電流法による非破壊評価
[ショットピーニング技術,26(1),(2014),8-15]
祖山 均, 熊谷 直輝
Analysis of the Formation of Plastic Deformation Layer on the Surface of Polycrystalline Metals Subjected to a Micro-Size High-Rate Shot Impact
[International Journal of Mechanical Sciences,75,(2013),316-323]
Shinya Kanou, Masaaki Nishikawa and Hitoshi Soyama
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress
[Journal of Surface Engineered Materials and Technology, 3, (4), (2013), 262-268]
Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama
Introduction of Compressive Residual Stress by Means of Cavitation Peening into a Titanium Alloy Rod Used for Spinal Implants
[Materials Sciences and Applications, 4(7A), (2013), 23-28]
Osamu Takakuwa, Amrinder S. Gill, Gokul Ramakrishnan, Seetha R. Mannava, Vijay K. Vasudevan and Hitoshi Soyama
Comparison of Mechanisms of Advanced Mechanical Surface Treatments in Nickel-Based Superalloy
[Materials Science and Engineering A, 576, (2013), 346-355]
Amrinder Gill, Abhishek Telang, S.R. Mannava, Dong Qian, Young-Shik Pyoun, Hitoshi Soyama and Vijay K. Vasudevan
An Indicator for the Suppression of Fatigue Crack Growth by Hybrid Peening
[Journal of Solid Mechanics and Materials Engineering, 7(3),(2013), 357-371]
Osamu Takakuwa, Kouhei Yamamiya and Hitoshi Soyama
Optimizing the Conditions for Residual Stress Measurement Using a Two-Dimensional XRD Method with Specimen Oscillation
[Advances in Materials Physics and Chemistry, 3, (2013), 8-18]
Osamu Takakuwa and Hitoshi Soyama
Effect of Nozzle Outlet Geometry of a High-Speed Water Jet on Cutting Ability of Submerged Abrasive Water Jet
[Proceedings of 10th Pacific Rim International Conference on Water Jet Technology, (2013), 237-241]
Hitoshi Soyama
ショットピーニングによる歯科用材料の機械的特性の向上
[日本機械学会論文集, 79A(803), (2013), 1019-1029]
青柳吉輝,河原木雄介,徳江藍,大久保力廣,桑脩,祖山均
Effect of Nozzle Geometry on a Standard Cavitation Erosion Test Using a Cavitating Jet
[Wear, 297(1-2), (2013), 895-902]
H. Soyama
Similarity Law on Shedding Frequency of Cavitation Cloud Induced by a Cavitating Jet
[Journal of Fluid Science and Technology, 7(3), (2012), 405-420]
Satoshi NISHIMURA, Osamu TAKAKUWA and Hitoshi SOYAMA
Effect of Nozzle Shape for High Injection Pressure on Aggressivity of Cavitating Jet
[Proceedings of 21st International Conference on Water Jetting, (2012), 367-378]
H. Soyama, O. Takakuwa and A. Naito
Power Law of Injection Pressure and Nozzle Diameter on Aggressive Intensity of a Cavitating Jet
[Proceedings of 21st International Conference on Water Jetting, (2012), 343-354]
H. Soyama
Fatigue Strength of Steel Rollers and Gears Treated by Cavitation Peening with Short Processing Time
[Journal of Advanced Mechanical Design, Systems and Manufacturing, 6(1),(2012), 33-43]
Masanori Seki, Naruto Nishie, Seiya Kozai, Masamitsu Kakuda, Hitoshi Soyama, Akima Naito and Masahiro Fujii
Effect of the Impact Energy of Various Peening Techniques on the Induced Plastic Deformation Region
[Journal of Materials Processing Technology, 212(10), (2012), 1998-2006]
S. Kanou, O. Takakuwa, S. R. Mannava, D. Qian, V. K. Vasudevan and H. Soyama
Optimum Injection Pressure of a Cavitating Jet for Introducing Compressive Residual Stress into Stainless Steel
[Journal of Power and Energy Systems ,6(2), (2012), 63-75]
H. Soyama, K. Nagasaka, O. Takakuwa and A. Naito
Using an Indentation Test to Evaluate the Effect of Cavitation Peening on the Invasion of the Surface of Austenitic Stainless Steel by Hydrogen
[Surface and Coatings Technology, (2012), 206(18), 3747-3750]
O. Takakuwa and H. Soyama
The Effect of Scanning Pitch of nozzle for a Cavitating Jet during Overlapping Peening Treatment
[Surface and Coatings Technology, 206(23), (2012), 4756-4762]
O. Takakuwa and H. Soyama
Estimation of the Depth of Surface Modification Layer Induced by Cavitation Peening
[Journal of Materials Processing Technology, 212(8), (2012), 1716-1722]
O. Takakuwa, M. Nishikawa and H. Soyama
Suppression of Hydrogen-Assisted Fatigue Crack Growth in Austenitic Stainless Steel by Cavitation Peening
[International Journal of Hydrogen Energy, 37(6), (2012), 5268-5276]
O. Takakuwa and H. Soyama
Numerical Simulation of the Effects of Residual Stress on the Concentration of Hydrogen around a Crack Tip
[Surface and Coatings Technology, 206(11-12), (2012), 2892-2898 ]
O. Takakuwa, M. Nishikawa and H. Soyama
Evaluation of Stress Anisotropy and Shearing Stress Using an Eddy Current Method with a Tangential-Rectangular Coil
[Journal of Solid Mechanics and Materials Engineering, 6(3), (2012), 201-212]
Y. Sekine and H. Soyama
Evaluation of Equibiaxial Compressive Stress Introduced into Austenitic Stainless Steel Using an Eddy Current Method
[Journal of Nondestructive Evaluation, 31(2), (2012), 99-107]
Y. Sekine and H. Soyama
Using an Eddy Current Method with Inverse Analysis to Determine the Thickness of the Layer Modified by Cavitation Peening at the Surface of Type 316L Austenitic Stainless Steel
[NDT & E International, 46, (2012), 94-99]
Y. Sekine and H. Soyama
Development of Peening Technique Using Re-Circulating Shot Accelerated by a Water Jet
[Materials Science and Technology, 28(2), (2012), 234-238]
A. Naito, O. Takakuwa and H. Soyama
水噴流加速式循環型ショットピーニングによるステンレス鋼の水素脆化・}止
[噴流工学, 28(2), (2011), 12-17]
内藤 暁馬,桑 脩,祖山 均
Enhancing the Aggressive Intensity of a Cavitating Jet by Means of the Nozzle Outlet Geometry
[Journal of Fluids Engineering, Trans. ASME, 133(10), (2011), 101301-1-11]
Hitoshi Soyama
Effect of Injection Pressure and Size of Nozzle Throat of a Cavitating Jet on Cavitation Peening
[Proceedings of International Conerence on Shot Peening, (2011), 129-134]
H. Soyama, O. Takakuwa and A. Naito
Luminescent Spots Induced by a Cavitating Jet
[Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference 2011, (2011), AJK2011-33018]
Hitoshi Soyama
Optimum Injection Pressure of a Cavitating Jet on Introduction of Compressive Residual Stress into Stainless Steel
[Proceedings of 19th Intenational Conference on Nuclear Engineering, (2011), ICONE19-43895]
Hitoshi Soyama, Kazuya Nagasaka, Osamu Takakuwa and Akima Naito
Enhancement of Aggressivity of Cavitating Jet and Its Practical Application
[Journal of Fluid Science and Technology, 6(4), (2011), 510-521]
Hitoshi Soyama and Osamu Takakuwa
Suppression of Fatigue Crack Propagation with Hydrogen Embrittlement in Stainless Steel by Cavitation Peening
[Strength, Fracture and Complexity,7, (2011), 79-85]
O.Takakuwa, T.Ohmi, M.Nishikawa, A.T.Yokobori Jr. and H.Soyama
Evaluation of the Enhanced Cavitation Impact Energy Using a PVDF Transducer with an Acrylic Resin Backing
[Measurement, 44, (2011), 1279-1283]
H. Soyama, Y. Sekine and Kenichi Saito
Introduction of Compressive Residual Stress into Stainless Steel by Employing a Cavitating Jet in Air
[Surface & Coatings Technology, 205(10), (2011), 3167-3174]
H. Soyama, T. Kikuchi, M. Nishikawa and O. Takakuwa
Corrosion Behavior of Pressure Vessel Steel Exposed to Residual Bubbles after Cavitation Bubble Collapse
[Corrosion, 67(2), (2011), 025001-1-8]
H. Soyama
Two-step Method to Evaluate Equibiaxial Residual Stress of Metal Surface
[Materials and Design, 32 (6), (2011), 3240-3247]
M. Nishikawa and H. Soyama
Suppression of fatigue crack growth in austenite stainless steel by cavitation peening
[Key Engineering Materials Vols, 452-453, (2011), 641-644]
Osamu Takakuwa, Masaaki Nishikawa and Hitoshi Soyama
Technique for Partially Strengthening Electrical Steel Sheet of IPM Motor Using Cavitation Peening
[Materials Science and Technology, 27(9), (2011), 1422-1426]
O. Takakuwa, M. Nishikawa and H. Soyama
Chemical Reactor Using Radical Induced by a Cavitating Jet
[Proceeding of 20th International Conference on Water Jetting, (2010), 259-267]
Hitoshi Soyama and Taka Muraoka
球状圧子を用いた微小押込み試験による金属材料の降伏応力の同定法
[日本機械学会論文集, 76A(772), (2010), 1781-1788]
西川雅章, 河原木雄介, 祖山均
ピーニングに伴うステンレス鋼表面の力学特性変化に対する高速変形の影響
[日本機械学会論文集,76A (772), (2010), 1775-1780]
狩野真也, 西川雅章, 祖山均
キャビテーションピーニングを受けたステンレス鋼の表面改質層の降伏応力分布と疲労特性の評価. [日本機械学会論文集,76A (770), (2010), 1367-1372]
西川 雅章, 桑 脩, 祖山 均
Sustainable Surface Modification Using Cavitation Impact for Enhancing Fatigue Strength Demonstrated by a Power Circulating-Type Gear Tester
[International Journal of Sustainable Engineering, 3(1), (2010), 25-32]
H. Soyama and Y. Sekine
Comparison of Abilities of Various Cavitating Jets
[Water Jetting Technology for LOHAS, International Academic Printing Co., Ltd., (2009), 133-137]
H. Soyama, K. Nishizawa and M. Mikami
Surface Modification of Alloy Tool Steel for Forging Dies by Cavitation Peening
[Review of Automotive Engineering, 30(4), (2009), 393-399]
Y. Sekine and H. Soyama
Enhancement of Cavitation Aggressivity around a Cavitating Jet by Injecting Low-Speed Water Jet for Cavitation Peening
[Proceedings of 7th International Sympoisum on Cavitation, (Paper No. 12), (2009), 1-10]
Hitoshi SOYAMA, Kazuto NISHIZAWA and Mitsuhiro MIKAMI
A Microwave Probe Nanostructure for Atomic Force Microscopy
[Microsystem Technologies, 15(8), (2009),1195-1199]
Y. Ju, M. Hamada, T. Kobayashi and H. Soyama
Fretting Fatigue Behavior of Cavitation Shotless Peened
[Tribology Letters, 36(2), (2009), 89-94]
H. Lee, S. Mall and H. Soyama
ノズル出口形状によるキャビテーション噴流まわりの衝撃力の強力化
[混相流, 混相流研究の進展4, (2009), 77-85]
祖山 均,西澤 一登
キャビテーション・ショットレス・ピーニングによる鍛造用金型の表面改質
[自動車技術会論文集, 40(3), (2009), 861-866]
関根 裕一, 祖山 均
Evaluation of the Surface of Alloy Tool Steel Treated by Cavitation Shotless Peening Using an Eddy Current Method
[Surface & Coatings Technology, 203(16), (2009), 2254-2259]
Y. Sekine, H. Soyama
Release of Micro Strain in Tool Alloy Steel by a Cavitating Jet in Air
[Proceedings of 19th International Conference on Water Jetting, (2008), 219-228]
H.Soyama, N.Yamada, O.Takakuwa, Y.Sekine and M.Mikami
Growth and proliferation of bone marrow mesenchymal stem cells aected by type I collagen, bronectin and bFGF
[Materials Science and Engineering C, 28(8), (2008), 1467-1471]
G. Song, Y. Ju, H. Soyama
Improvement of the Fatigue Strength of Stainless Steel SUS316L by a Cavitating Jet with an Associated Water Jet in Water
[ISIJ International, 48(11), (2008), 1577-1581]
Hitoshi Soyama, Yuichi Sekine and Yosuke Oyama
キャビテーション・ ショットレス・ ピーニングによるSUS316L ステンレス鋼の表面改質層の縦弾性係数の低減
[日本機械学会論文集, 74A(742), (2008), 901-908]
関根裕一, 甲斐彰, 祖山均
Introduction of Macro-Stratin with Releasing Micro-Strain by Cavitation Shotless Peening
[International Journal of Modern Physics B, 22 (9-11), (2008), 1680-1685]
Hitoshi Soyama
Visualization of the Plastic Deformation Area Beneath the Surface of Carbon Steel Induced by Cavitation Impact
[Scripta Materialia, 59(3), (2008), 272-275]
A. Kai, H. Soyama
Improving the Fatigue Strength of the Elements of a Steel Belt for CVT by Cavitation Shotless Peening
[Journal of Materials Science, (2008), 5028-5030]
Hitoshi Soyama, Masanori Shimizu, Yuji Hattori, Yuji Nagasawa
Development of a Nanostructural Microwave Probe Based on GaAs
[Microsystem Technologies, 14(7), (2008), 1021-1025]
Y. Ju, T. Kobayashi, H. Soyama
Rolling Contact Fatigue Life of Cavitation-Peened Steel Gear
[Tribology Online, 3(2), (2008), 116-121]
Masanori Seki, Hitoshi Soyama, Masahiro Fujii and Akira Yoshida
Relieving Micro-Strain by Introducing Macro-Strain in a Polycrystalline Metal Surface by Cavitation Shotless Peening
[Materials Letters, 62(20), (2008), 3564-3566]
H. Soyama, N. Yamada
Quantitative Evaluation of Cracks under Water by Microwaves
[Key Engineering Materials, 353-358, (2007), 2361-2365]
Yang Ju, Toru Miyadu, Hitoshi Soyama and Masumi Saka
Improvement of Fatigue Strength of Stainless Steel by Using a Cavitating Jet with an Associated Water Jet in Water
[Key Engineering Materials, 353-358, (2007), 162-165]
Hitoshi Soyama, Mitsuhiro Mikami
Regulation of Cyclic Longitudinal Mechanical Stretch on Proliferation of Human Bone Marrow Mesenchymal Stem Cells
[Molecular & Cellular Biomechanics, 4, (2007), 201-210]
G. Song, Y. Ju, H. Soyama, T. Ohashi and M. Sato
Improvement of Fatigue Strength by Using Cavitating Jets in Air and Water
[Journal of Materials Science, 42(16), (2007), 6638-6641]
H. Soyama
Characterization of Polysilicon Thin Films for MEMS Applications
[WSEAS Transactions on Systems, 5(10), (2006), 2418-2422]
Dan O. Macodiyo, Hitoshi Soyama, Kazuo Hayashi
海水中の TB340H 純チタンと SUS316L ステンレス鋼のキャビテーション壊食
[日本機械学会論文集, 72A(721), (2006), 1370-1375]
望月 敬美, 横田 源弘, 祖山 均, 服部 修次
キャビテーション損傷の潜伏期の定量的予測に関する一考察
[ターボ機械, 34 (6), (2006), 336-342]
祖山 均, 二川 正敏, 直江 崇
Optimization of Cavitation Peening Parameters for Fatigue Performance of Caburized Steel Using Taguchi Methods
[Journal of Materials Processing Technology, 178(1-3), (2006), 234-240]
Dan O. Macodiyo, Hitoshi Soyama
Microdefects Induced by Cavitation for Gettering in Silicon Wafer
[Journal of Matrerials Science, 41(16), (2006), 5380-5382]
Dan O. Macodiyo, Hitoshi Soyama, Takashi Masakawa, Kazuo Hayashi
Estimation of Cavitation Intensity from the Time Taken for Bubbles to Develop
[Tribology Letters, 23(1), (2006), 23-26]
H. Soyama, M. Futakawa
キャビテーション噴流によりシリコンウェーハに導入したバックサイドダメージの X 線回折による評価
[噴流工学, 22(2), (2005), 18-22]
祖山 均, 齋藤 卓, ダン マコディヨ, 林 一夫
Contactless Measurement of Electrical Conductivity of Si Wafers Independent of Wafer Thickness
[Applied Physics Letters, 87(16), (2005), 162102-1-162102-3]
Yang Ju, Yo Hirosawa, Hitoshi Soyama, and Masumi Saka
Fatigue Strength Improvement of Gears Using Cavitation Shotless Peening
[Tribology Letters, 18(2), (2005), 181-184]
Hitoshi Soyama, Dan O. Macodiyo
High-Speed Observation of a Cavitating Jet in Air
[Journal of Fluids Engineering, Trans. ASME, 127(4), (2005), 1095-1101]
H. Soyama
Estimation of Pitting Damage Induced by Cavitation Impacts
[Journal of Nuclear Materials, 343, (2005), 116-122]
H. Soyama, M. Futakawa and K. Homma
Pitting Damage by Pressure Waves in a Mercury Target
[Journal of Nuclear Materials, 343, (2005), 70-80]
M. Futakawa, T. Naoe, C.C. Tsai, H. Kogawa, S. Ishikura, Y. Ikeda, H. Soyama and H. Date
マイクロ波によるステンレス鋼表面上の閉じたき裂の定量評価
[材料, 53(8), (2004), 900-905]
巨 陽, 宮津 亨, 内村 泰博, 祖山 均, 坂 真澄
Evaluation of the Effectiveness of Backside Damage Gettering in Silicon Introduced by a Caviating Jet
[Applied Physics Letters, 85(17), (2004), 3935-3937]
H. Kumano, T. Sasaki and H. Soyama
Effect of Cavitation Number on the Improvement of Fatigue Strength of Carburized Steel Using Cavitation Shotless Peening
[Key Engineering Materials, 261 - 263, (2004), 1245-1250]
Dan O. Macodiyo, Hitoshi Soyama, Masumi Saka
Evaluation of the Damage for Gettering in Silicon Wafer Introduced by a Cavitating Jet
[Key Engineering Materials, 261 - 263, (2004), 1403-1408]
Hiroyuki Kumano, Hitoshi Soyama, Masumi Saka
Backside Damage Gettering of Cu by Using a Cavitating Jet
[Electrochemical and Solid-State Letters, 7(4), (2004), G51-G52]
Hiroyuki Kumano, Hitoshi Soyama
Compressive Residual Stress into Titanium Alloy Using Cavitation Shotless Peening Method
[Tribology Letters, 17(3), (2004), 501-504]
Hitoshi Soyama, Dan O. Macodiyo, Shankar Mall
Estimation of IncubationTime of Cavitation Erosion for Various Cavitating Conditions
[Tribology Letters, 17(1), (2004), 27 - 30]
Hitoshi Soyama, Masatoshi Futakawa
Peen Forming by Using a Cavitating Jet in Air
[Proceedings of the 7th Pacific Rim International Conference on Water Jetting Technology, (2003), 429 - 436]
Hitoshi Soyama, Kenichi Saito
Improvement of Fatigue Strength on Duralumin by Cavitation Shotless Peening
[Proceedings of International Conference on Advanced Technology in Experimental Mechanics 2003, CDROM, (2003), OS11W0131]
Dan o. Macodiyo, Hitoshi Soyama, Kenichi Saito, Masumi Saka
Localized-Impact Damage Caused by Proton Bombarding in Mercury Target
[J. Phys. IV France, 110, (2003), 583 - 588]
M. Futakawa, H. Kogawa, S. Ishikura, H. Kudo, H. Soyama
Cavitation Shotless Peening for Surface Modification of Alloy Tool Steel
[JSME International Journal, 46A(3), (2003), 398 - 402]
Hitoshi Soyama, Kei Sasaki, Dan Odhiambo, Masumi Saka
Cavitation Shotless Peening for Improvement of Fatigue Strength
[Proceedings of the 8th International Conference on Shot Peening, (2003), 435 - 440]
Hitoshi Soyama, Dan Odhiambo, Kenichi Saito
キャビテーション・ショットレスピーニングによる金属材料の疲労強度向上
[自動車技術会論文集, 34(1), (2003), 101 - 106]
祖山 均, 佐々木 圭, 斎藤 建一, 坂 真澄
Cavitation Shotless Peening for Improvement of Fatigue Strength of Carbonized Steel
[International Journal of Fatigue, 25(9 - 11), (2003), 1217 - 1222]
Dan Odhiambo, Hitoshi Soyama

Copyright Soyama Laboratory.